Salmo diamond feeder 90 3.60 free

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SHIMANO, Rapala, Salmo, Norfin, Savage Gear, Okuma, Raymarine, Prologic and more then Salmo Blaster Tele Carp m lbs Salmo Diamond Feeder 5. DIAMOND Series The DIAMOND series represents the BULLET, LEEDER, FORCE, FEEDER and AGRESSOR models. This reel range is intended mostly for.
 
 

Salmo diamond feeder 90 3.60 free

 
SHIMANO, Rapala, Salmo, Norfin, Savage Gear, Okuma, Raymarine, Prologic and more then Salmo Blaster Tele Carp m lbs Salmo Diamond Feeder 5. DIAMOND Series The DIAMOND series represents the BULLET, LEEDER, FORCE, FEEDER and AGRESSOR models. This reel range is intended mostly for.

 

Salmo Summer by Salmo Group – Issuu

 

Each Party shall, to the extent practicable, ensure that internationally agreed standards for regulation and supervision in the financial services sector and for the fight against tax evasion and avoidance are implemented and applied in its territory. In liberalising trade in computer services in accordance with Sections B through D, the Parties subscribe to the understanding set out in the following paragraphs.

CPC [30] 84, the United Nations code used for describing computer and related services, covers the basic functions used to provide all computer and related services including computer programs defined as the sets of instructions required to make computers work and communicate including their development and implementation , data processing and storage, and related services, such as consultancy and training services for staff of clients.

Technological developments have led to the increased offering of these services as a bundle or package of related services that can include some or all of these basic functions. For example, services such as web or domain hosting, data mining services and grid computing consist of a combination of basic computer services functions respectively.

Computer and related services, regardless of whether they are delivered via a network, including the Internet, include all services that provide:. Computer and related services enable the provision of other services such as banking by both electronic and other means. The Parties recognise that there is an important distinction between the enabling service such as web-hosting or application hosting and the content or core service that is being delivered electronically such as banking, and that in such cases the content or core service is not covered by CPC No later than three years after the entry into force of this Agreement, with a view to ensuring competition in postal and courier services not reserved to a monopoly in each Party, the Trade Committee shall set out the principles of the regulatory framework applicable to those services.

Those principles shall aim to address issues such as anti-competitive practices, universal service, individual licences and nature of the regulatory authority [31]. This Sub-section sets out the principles of the regulatory framework for the basic telecommunications services [32], other than broadcasting, liberalised pursuant to Sections B through D of this Chapter.

A regulatory authority for telecommunications services shall be legally distinct from and functionally independent of any supplier of telecommunications services. The regulatory authority shall be sufficiently empowered to regulate the telecommunications services sector. The tasks to be undertaken by a regulatory authority shall be made public in an easily accessible and clear form, in particular where those tasks are assigned to more than one body.

The decisions of, and the procedures used by, the regulatory authority shall be impartial with respect to all market participants. Provision of services shall, to the extent practicable, be authorised following a simplified authorisation procedure.

A licence can be required to address issues of attributions of frequencies, numbers and rights of way. The terms and conditions for such licence shall be made publicly available. Appropriate measures shall be maintained for the purpose of preventing suppliers who, alone or together, are a major supplier from engaging in or continuing anti-competitive practices.

These anti-competitive practices shall include in particular:. Each Party shall ensure that suppliers of public telecommunications transport networks or services in its territory provide, directly or indirectly within the same territory, to suppliers of public telecommunications transport services of the other Party the possibility to negotiate interconnection.

Interconnection should in principle be agreed on the basis of commercial negotiations between the companies concerned. Regulatory authorities shall ensure that suppliers that acquire information from another undertaking during the process of negotiating interconnection arrangements use that information solely for the purpose for which it was supplied and respect at all times the confidentiality of information transmitted or stored.

Interconnection with a major supplier shall be ensured at any technically feasible point in the network. Such interconnection shall be provided:. The procedures applicable for interconnection with a major supplier shall be made publicly available.

Major suppliers shall make publicly available either their interconnection agreements or their reference interconnection offers [37]. Each Party shall ensure that suppliers of public telecommunications transport services in its territory, other than suppliers of voice over internet protocol services, provide number portability to the extent technically feasible, and on reasonable terms and conditions.

Any procedures for the allocation and use of scarce resources, including frequencies, numbers and rights of way, shall be carried out in an objective, timely, transparent and non-discriminatory manner. The current state of allocated frequency bands shall be made publicly available, but detailed identification of frequencies allocated for specific government uses is not required.

Each Party has the right to define the kind of universal service obligations it wishes to maintain. Such obligations will not be regarded as anti-competitive per se, provided they are administered in a transparent, objective and non-discriminatory way.

The administration of such obligations shall also be neutral with respect to competition and not be more burdensome than necessary for the kind of universal service defined by each Party. Each Party shall ensure the confidentiality of telecommunications and related traffic data by means of a public telecommunications transport network and publicly available telecommunications services without restricting trade in services.

Any service supplier whose legally protected interests are adversely affected by a determination or decision of a regulatory authority:. Where the appeal body is not judicial in character, written reasons for its determination or decision shall always be given and its determination or decision shall also be subject to review by an impartial and independent judicial authority.

Determinations or decisions taken by appeal bodies shall be effectively enforced; and. Neither Party may permit an application for judicial review to constitute grounds for non-compliance with the determination or decision of the regulatory authority unless the relevant judicial body stays such determination or decision.

This Sub-section sets out the principles of the regulatory framework for all financial services liberalised pursuant to Sections B through D. Financial services include the following activities:. D exchange rate and interest rate instruments, including products such as swaps, forward rate agreements;. Nothing in this Agreement shall be construed to require a Party to disclose information relating to the affairs and accounts of individual consumers or any confidential or proprietary information in the possession of public entities.

Without prejudice to other means of prudential regulation of cross-border trade in financial services, a Party may require the registration of cross-border financial service suppliers of the other Party and of financial instruments.

Each Party commits to promoting regulatory transparency in financial services. When a Party requires membership or participation in, or access to, any self-regulatory organisations, securities or futures exchange or market, clearing agency or any other organisation or association, in order for financial service suppliers of the other Party to supply financial services on an equal basis to financial service suppliers of the Party, or when the Party provides directly or indirectly such entities with privileges or advantages in supplying financial services, the Party shall ensure observance of the obligations of Articles 7.

Under terms and conditions that accord national treatment, each Party shall grant to financial service suppliers of the other Party established in its territory access to payment and clearing systems operated by public entities and to official funding and refinancing facilities available in the normal course of ordinary business. Each Party shall permit a financial service supplier of the other Party established in its territory to provide any new financial service that the Party would permit its own financial service suppliers to supply, in like circumstances, under its domestic law, provided that the introduction of the new financial service does not require a new law or modification of an existing law.

A Party may determine the institutional and juridical form through which the service may be provided and may require authorisation for the provision of the service. Where such authorisation is required, a decision shall be made within a reasonable period of time and the authorisation may be refused only for prudential reasons.

No later than two years after the entry into force of this Agreement, and in no case later than the effective date of similar commitments stemming from other economic integration agreements:. Nothing in this Chapter shall be construed to prevent a Party, including its public entities, from exclusively conducting or providing in its territory activities or services forming part of a public retirement plan or statutory system of social security, except when those activities may be carried out, as provided by its domestic regulations, by financial service suppliers in competition with public entities or private institutions.

Nothing in this Agreement shall apply to activities conducted by a central bank or monetary authority or by any other public entity in pursuit of monetary or exchange rate policies. Nothing in this Chapter shall be construed to prevent a Party, including its public entities, from exclusively conducting or providing in its territory activities or services for the account or with the guarantee or using the financial resources of the Party, including its public entities except when those activities may be carried out, as provided by its domestic regulations, by financial service suppliers in competition with public entities or private institutions.

Chapter Fourteen Dispute Settlement shall apply to the settlement of disputes on financial services arising exclusively under this Chapter, except as otherwise provided in this Article. The Trade Committee shall, no later than six months after the entry into force of this Agreement, establish a list of 15 individuals.

Each Party shall propose five individuals respectively and the Parties shall also select five individuals who are not nationals of either Party and who shall act as chairperson to the arbitration panel. Those individuals shall have expertise or experience in financial services law or practice, which may include the regulation of financial service suppliers, and shall comply with Annex C Code of Conduct for Members of Arbitration Panels and Mediators.

When panellists are selected by lot pursuant to Article Notwithstanding Article Where such measure affects only a sector other than the financial services sector, the complaining Party may not suspend benefits in the financial services sector. Such recognition, which may be achieved through harmonisation or otherwise, may be based upon an agreement or arrangement between the Parties, or may be accorded autonomously.

A Party that is a party to an agreement or arrangement of the type referred to in paragraph 1 with a third party, whether at the time of entry into force of this Agreement or thereafter, shall afford adequate opportunity for the other Party to negotiate its accession to such agreements or arrangements, or to negotiate comparable ones with it, under circumstances in which there would be equivalent regulation, oversight, implementation of such regulation, and, if appropriate, procedures concerning the sharing of information between the parties to the agreement or arrangement.

Where a Party accords recognition autonomously, it shall afford adequate opportunity for the other Party to demonstrate that such circumstances exist. This Sub-section sets out the principles regarding the liberalisation of international maritime transport services pursuant to Sections B through D. The activities covered include the organisation and supervision of:.

In view of the existing levels of liberalisation between the Parties in international maritime transport:. Each Party shall permit international maritime service suppliers of the other Party to have an establishment in its territory under conditions of establishment and operation no less favourable than those accorded to its own service suppliers or those of any third party, whichever are the better, in accordance with the conditions inscribed in its list of commitments.

Each Party shall make available to international maritime transport suppliers of the other Party on reasonable and non-discriminatory terms and conditions the following services at the port:. The Parties, recognising the economic growth and trade opportunities that electronic commerce provides, the importance of avoiding barriers to its use and development, and the applicability of the WTO Agreement to measures affecting electronic commerce, agree to promote the development of electronic commerce between them, in particular by cooperating on the issues raised by electronic commerce under this Chapter.

The Parties agree that the development of electronic commerce must be fully compatible with the international standards of data protection, in order to ensure the confidence of users of electronic commerce. The Parties shall maintain a dialogue on regulatory issues raised by electronic commerce, which will, inter alia, address the following issues:.

Subject to the requirement that such measures are not applied in a manner which would constitute a means of arbitrary or unjustifiable discrimination between countries where like conditions prevail, or a disguised restriction on establishment or cross-border supply of services, nothing in this Chapter shall be construed to prevent the adoption or enforcement by either Party of measures:.

The Parties undertake to impose no restrictions on, and to allow, all payments and transfers on the current account of balance of payments between residents of the Parties to be made in freely convertible currency, in accordance with the Articles of Agreement of the International Monetary Fund. With regard to transactions on the capital and financial account of balance of payments, the Parties undertake to impose no restrictions on the free movement of capital relating to direct investments made in accordance with the laws of the host country, to investments and other transactions liberalised in accordance with Chapter Seven Trade in Services, Establishment and Electronic Commerce and to the liquidation and repatriation of such invested capital and of any profit generated therefrom.

Without prejudice to other provisions in this Agreement, the Parties shall ensure, with regard to transactions not covered by paragraph 1 on the capital and financial account of balance of payments, in accordance with the laws of the host country, the free movement by investors of the other Party of capital relating to, inter alia:.

Without prejudice to other provisions in this Agreement, the Parties shall not introduce any new restrictions on the movement of capital between residents of the Parties and shall not make the existing arrangements more restrictive.

The Parties may hold consultations with a view to further facilitating the movement of capital between them in order to promote the objectives of this Agreement. Subject to the requirement that such measures are not applied in a manner which would constitute a means of arbitrary or unjustifiable discrimination between countries where like conditions prevail, or a disguised restriction on capital movements, nothing in this Chapter shall be construed to prevent the adoption or enforcement by either Party of measures:.

Where, in exceptional circumstances, payments and capital movements between the Parties cause or threaten to cause serious difficulties for the operation of monetary policy or exchange rate policy [45] in Korea or one or more Member States of the European Union, safeguard measures with regard to capital movements that are strictly necessary [46] may be taken by the Parties concerned [47] for a period not exceeding six months [48].

The Trade Committee shall be informed forthwith of the adoption of any safeguard measure and, as soon as possible, of a time schedule for its removal. The Parties recognise their shared interest in promoting international liberalisation of government procurement markets in the context of the rules-based international trading system.

For all procurement covered by this Chapter, the Parties shall apply the provisionally agreed revised GPA text [49] hereinafter referred to as the “revised GPA” , with the exception of the following:. For the purposes of this Agreement, build-operate-transfer contracts hereinafter referred to as “BOT contracts” and public works concessions, as defined in Annex 9, shall be subject to Annex 9.

Protection of intellectual property includes protection against unfair competition as referred to in article 10 bis of the Paris Convention for the Protection of Industrial Property hereinafter referred to as the “Paris Convention”. The Parties agree to exchange views and information on their practices and policies affecting transfer of technology, both within their respective territories and with third countries.

This shall in particular include measures to facilitate information flows, business partnerships, licensing and subcontracting. Particular attention shall be paid to the conditions necessary to create an adequate enabling environment for technology transfer in the host countries, including, inter alia, issues such as development of human capital and legal framework. Each Party shall take measures, as appropriate, to prevent or control licensing practices or conditions pertaining to intellectual property rights which may adversely affect the international transfer of technology and which constitute an abuse of intellectual property rights by right holders.

The Parties shall be free to establish their own regime for the exhaustion of intellectual property rights. The rights of broadcasting organisations shall expire not less than 50 years after the first transmission of a broadcast, whether this broadcast is transmitted by wire or over the air, including by cable or satellite.

Neither Party may permit the retransmission of television signals whether terrestrial, cable or satellite on the Internet without the authorisation of the right holder or right holders, if any, of the content of the signal and of the signal [50]. The Parties shall endeavour to achieve a high level of rationalisation and to improve transparency with respect to the execution of the task of their respective collecting societies. For the purposes of paragraph 5, “communication to the public” includes making the sounds or representations of sounds fixed in a phonogram audible to the public.

Each Party shall provide performers with the exclusive right to authorise or prohibit the broadcasting by wireless means and the communication to the public of their performances, except where the performance is itself already a broadcast performance or is made from a fixation. Each Party shall provide performers and producers of phonograms with the right to a single equitable remuneration, if a phonogram published for commercial purposes or a reproduction of such phonogram is used for broadcasting by wireless means or for any communication to the public.

Each Party shall establish in its legislation that the single equitable remuneration shall be claimed from the user by performers or producers of phonograms, or by both. The Parties may enact legislation that, in the absence of an agreement between performers and producers of phonograms, sets the terms according to which performers and producers of phonograms shall share the single equitable remuneration.

Each Party shall provide broadcasting organisations with the exclusive right to authorise or prohibit:. It shall be a matter for the domestic law of the State where protection of this right is claimed to determine the conditions under which it may be exercised. The Parties may, in their legislation, provide for limitations of, or exceptions to, the rights granted to the right holders referred to in Articles Each Party shall provide adequate legal protection against the circumvention of any effective technological measures, which the person concerned carries out in the knowledge, or with reasonable grounds to know, that such person is pursuing that objective.

Each Party shall provide adequate legal protection against the manufacture, import, distribution, sale, rental, advertisement for sale or rental, or possession for commercial purposes, of devices, products or components, or the provision of services which:. Technological measures shall be deemed effective where the use of a protected work or other subject matter is controlled by the right holders through the application of an access control or protection process, such as encryption, scrambling or other transformation of the work or other subject matter, or a copy control mechanism, which achieves the objective of protection.

Each Party may provide for exceptions and limitations to measures implementing paragraphs 1 and 2 in accordance with its legislation and the relevant international agreements referred to in Article Each Party shall provide adequate legal protection against any person knowingly performing without authority any of the following acts:.

For the purposes of this Agreement, rights management information means any information provided by right holders which identifies the work or other subject matter referred to in this Agreement, the author or any other right holder, or information about the terms and conditions of use of the work or other subject matter, and any numbers or codes that represent such information.

Paragraph 2 shall apply when any of these items of information is associated with a copy of, or appears in connection with the communication to the public of, a work or other subject matter referred to in this Agreement.

Korea shall fully implement the obligations of Articles The European Union and Korea shall provide for a system for the registration of trademarks in which the reasons for a refusal to register a trademark shall be communicated in writing and may be provided electronically to the applicant who will have the opportunity to contest such refusal and to appeal a final refusal judicially.

The European Union and Korea shall also introduce the possibility for interested parties to oppose trademark applications. The European Union and Korea shall provide a publicly available electronic database of trademark applications and trademark registrations. Each Party shall provide for the fair use of descriptive terms as a limited exception to the rights conferred by a trademark and may provide for other limited exceptions, provided that limited exceptions take account of the legitimate interests of the owner of the trademark and of third parties.

Having examined the Agricultural Products Quality Control Act, with its implementing rules, in so far as it relates to the registration, control and protection of geographical indications for agricultural products and foodstuffs in Korea, the European Union concludes that this legislation meets the elements laid down in paragraph 6.

Having examined a summary of the specifications of the agricultural products and foodstuffs corresponding to the geographical indications of Korea listed in Annex A, which have been registered by Korea under the legislation referred to in paragraph 1, the European Union undertakes to protect the geographical indications of Korea listed in Annex A according to the level of protection laid down in this Chapter. Having examined a summary of the specifications of the agricultural products and foodstuffs corresponding to the geographical indications of the European Union listed in Annex A, which have been registered by the European Union under the legislation referred to in paragraph 2, Korea undertakes to protect the geographical indications of the European Union listed in Annex A according to the level of protection laid down in this Chapter.

Paragraph 3 shall apply to geographical indications for wines with respect to geographical indications added pursuant to Article The European Union and Korea agree that the elements for the registration and control of geographical indications referred to in paragraphs 1 and 2 are the following:.

Recognition of specific geographical indications for wines [53], aromatised wines [54] and spirits [55]. In Korea, the geographical indications of the European Union listed in Annex B shall be protected for those products which use these geographical indications in accordance with the relevant laws of the European Union on geographical indications.

In the European Union, the geographical indications of Korea listed in Annex B shall be protected for those products which use these geographical indications in accordance with the relevant laws of Korea on geographical indications. A name protected under this Sub-section may be used by any operator marketing agricultural products, foodstuffs, wines, aromatised wines or spirits conforming to the corresponding specification. If geographical indications of the Parties are homonymous, protection shall be granted to each indication provided that it has been used in good faith.

The Working Group on Geographical Indications shall decide the practical conditions of use under which the homonymous geographical indications will be differentiated from each other, taking into account the need to ensure equitable treatment of the producers concerned and that consumers are not misled. If a geographical indication protected through this Agreement is homonymous with a geographical indication of a third country, each Party shall decide the practical conditions of use under which the homonymous geographical indications will be differentiated from each other, taking into account the need to ensure equitable treatment of the producers concerned and that consumers are not misled.

Nothing in this Agreement shall oblige the European Union or Korea to protect a geographical indication which is not or ceases to be protected in its country of origin or which has fallen into disuse in that country. The date of application for protection or recognition of the geographical indication is determined in accordance with Article The Parties shall enforce the protection provided for in Articles They shall also enforce such protection at the request of an interested party.

The registration of a trademark that corresponds to any of the situations referred to in Article The European Union and Korea agree to add geographical indications to be protected to the Annexes A and B in accordance with the procedure set out in Article A name may not be registered as a geographical indication where it conflicts with the name of a plant variety, including a grape variety, or an animal breed and as a result is likely to mislead the consumer as to the true origin of the product.

The Working Group may make recommendations and adopt decisions by consensus. The location of the meeting shall alternate between the Parties. The Working Group shall meet at a time and a place and in a manner which may include by videoconference, mutually determined by the Parties, but no later than 90 days after the request.

The Working Group shall also ensure the proper functioning of this Sub-section and may consider any matter related to its implementation and operation.

In particular, it shall be responsible for:. The Working Group may discuss any matter of mutual interest in the area of geographical indications. The provisions of this Sub-section are without prejudice to the right to seek recognition and protection of a geographical indication under the relevant legislation of the European Union or Korea. The European Union and Korea shall provide for the protection of independently created designs that are new and that are original or have individual character [60].

This protection shall be provided by registration, and shall confer exclusive rights upon their holders in accordance with this Sub-section. The European Union and Korea shall provide the legal means to prevent the use of the unregistered appearance of a product, only if the contested use results from copying the unregistered appearance of such product [61].

Such use shall at least cover presenting [62], importing or exporting goods. The duration of protection available in the Parties following registration shall amount to at least 15 years. The duration of protection available in the European Union and Korea for unregistered appearance shall amount to at least three years. The European Union and Korea may provide limited exceptions to the protection of designs, provided that such exceptions do not unreasonably conflict with the normal exploitation of protected designs and do not unreasonably prejudice the legitimate interests of the owner of the protected design, taking account of the legitimate interests of third parties.

Design protection shall not extend to designs dictated essentially by technical or functional considerations. A design right shall not subsist in a design which is contrary to public policy or to accepted principles of morality. A design protected by a design right registered in the European Union or in Korea in accordance with this Sub-section shall also be eligible for protection under the law of copyright applicable in the territory of the Parties as from the date on which the design was created or fixed in any form [63].

The Parties shall make all reasonable efforts to comply with articles 1 through 16 of the Patent Law Treaty In interpreting and implementing the rights and obligations under this Sub-section, the Parties are entitled to rely upon the Doha Declaration. The Parties recognise that pharmaceutical products [64] and plant protection products [65] protected by a patent in their respective territories are subject to an administrative authorisation or registration procedure before being put on their markets.

The Parties shall provide, at the request of the patent owner, for the extension of the duration of the rights conferred by the patent protection to compensate the patent owner for the reduction in the effective patent life as a result of the first authorisation to place the product on their respective markets. The extension of the duration of the rights conferred by the patent protection may not exceed five years [66].

Protection of data submitted to obtain a marketing authorisation for pharmaceutical [67] products. The Parties shall guarantee the confidentiality, non-disclosure of and non-reliance on data submitted for the purpose of obtaining an authorisation to put a pharmaceutical product on the market.

A composite, multipurpose, medium-fast action type spinning rod for angling with various lures. The spinning rod blank is equipped with lightweight guides with SIC inserts on high legs and an elegant cork handle and a lightweight buffer on the base end. The spin fishing rod for angling on jig baits. The spinning rod blank of medium-fast action type is made of composite and a sensitive tip of graphite.

The spinning rod is equipped with lightweight guides with SIC inserts, the elegant handle with cork covering and the reliable screw reel seat. A composite, multipurpose medium action type spinning rod. The handle has a classic reel seat with a lower fastening type and a plastic tip on the base end. A composite, medium action type, compact telescopic fishing rod made, equipped with reliable guides with SIC inserts.

The cork handle with a lower nut of fastening the reel has a technological plastic screwcap on the base end. The spinning rod blank is made of lightweight glass fibre; the sensitive hollow tip is glued on its upper part. The guides are equipped with SIC inserts. The spinning rod blank has a neoprene handle with screw-type reel fastening.

A series of inexpensive, medium-fast action type spin fishing rods made of glass fibre. The spinning rod has IN STEEK type fastening of pieces, a neoprene handle with classic reel fastening with a lower fastening nut and guides with SIC inserts installed on one fastening leg. A multipurpose, economy class telescopic spinning rod made of lightweight glass fibre.

The fishing rod is equipped with ceramic guides with the soldered fastening of each ring to the upper support ring. The handle is made of neoprene and equipped with a screw-type reel seat with a lower fastening nut. A medium rigidity, medium-fast action types spinning rod intended for angling big fish.

The spinning rod withstands extreme loads; it will not break if a fish suddenly goes under the boat and bends the spinning rod more than the critical angle. The blank is made of composition materials and equipped with lightweight guides with SIC inserts, a convenient cork handle with a reliable classic reel seat and a rubber buffer on the base end. The spinning rod is intended for angling predatory fish with lures of any kind. A powerful, multipurpose spinning rod made of extra-strong composite materials and an grown-in sensitive tip made of glass fibre.

The mediumfast action type blank is equipped with reinforced guides with SIC inserts, a cork handle with a reliable graphite reel seat with a lower nut reel fastening and a neoprene buffer on the base end. The spinning rod has a rigid blank and is intended for extreme angling of large predatory fish with any kind of lure, as well as for trolling fishing.

Trolling Fishing Rods be clearly visible by the spinning rod tip while being guiding. All fishing rods of this model series are designed for fighting the strongest fish. This group of spinning rods meet increased standards not only by power, but also by sensitivity. Working the bait at depths should. A powerful, medium-fast action type spin fishing rod for angling big fish from a boat, primarily for trolling.

The blank is made of composite, with a grown-in transparent glass-fibre plastic tip. This powerful trolling rod is intended for trolling big fish.

The very durable fishing rod blank is made of composite materials and has a grown-in transparent glass-fibre plastic tip. The sensitive tip clearly responds to bait being worked at depths.

It is able to withstand loads that bend it to negative angles when playing a fish. The blank is equipped with reinforced guides with SIC inserts, a convenient neoprene handle with a reliable screw-type reel seat. A powerful trolling rod intended for trolling big fish. The blank is equipped with reinforced guides with SIC inserts, a convenient neoprene handle with a reliable multiplier type reel seat. Extremely powerful rod for angling by using the baits up to g.

The blank is made of special reinforced glass fibre and equipped with reinforced rings and SIC inserts, with two legs.

Powerful handle is made of neoprene. The rod top is painted in bright yellow signal colour. One- and two-piece powerful fishing rods for trolling and for angling by weighing from a boat or with bottom tackle.

Medium action type fishing rods with IN STEEK connection, reinforced guides with SIC inserts, a neoprene handle with screw-type reel fastening with a lower nut and a rubber buffer on the base end. A powerful glass-fibre plastic telescopic fishing rod for trolling and for angling by weighing from a boat. The fishing rod blank is equipped with reinforced double-support guides with SIC inserts and an additional offloading ring on the upper piece with a colour tip.

These fishing rod models lets you choose the best fishing rod for specific conditions. Thanks to IM7 graphite reinforced due to a special fibre weave, the fishing rod is of medium-fast action type and has high power. The fishing rod is equipped with the classic diverse handle with neoprene grips, a reliable reel seat with a lower nut reel fastening, increased Guides with SIC inserts and an additional off-loading ring on the small lash.

The lower grip is protected against damage with the screw-type titan buffer. The convenient synthetic case will protect Guides against damage when transporting the fishing rod. The fishing rod allows lures weighing up to g to be cast; the fishing rod holds lures up to g. A two-piece, medium action type carp fishing rod with a blank made of IM6 graphite that is sufficiently rigid and has a good casting ability. The fishing rod has: reinforcing guides with SIC inserts, a diverse handle with neoprene grips, a reliable screw-type reel seat and a metal buffer on the base end.

The fishing rod allows lures weighing up to g to be cast. A three-piece, medium action type carp fishing rod with a blank made of IM7 graphite that is sufficiently rigid and has a good casting ability. The fishing rod has: reinforced guides and a tulip with SIC inserts, a diverse handle with neoprene grips and a reliable screw-type reel seat. It is convenient to transportation because of its small external dimensions.

These carp fishing rods allow lures weighing up to g to be cast. A sufficiently powerful, medium action type carp fishing rod made of composite material. The fishing rod has three pieces, making it compact when transported. The blank is equipped with reinforced guides on two supports with SIC inserts and a straddled cork handle with a lower nut reel fastening. The well-casting fishing rod blank has a handle with a reliable reel seat. An inexpensive fishing rod for angling not only carp, but also other big fish.

Every detachable tip has a distinctive colouration on the upper part, depending on rigidity: yellow, green or red. Fast action three-piece feeder fishing rod with casting weight up to g. Blank is made of IM7 high-modulus graphite ensuring the necessary hardness and good casting ability. The feeder is equipped by rod guides with SIC inserts, cork handle with classic screw-type reel seat. Three various sensitivity feeder tips are packed in plastic case for better transportation and storing.

The blank is made of high modulus IM7 graphite. The feeder rod is equipped with Guides with SIC inserts, a neoprene handle with a classic reel seat with a lower fastening nut.

A neoprene handle with a rubber buffer on the base end. A complete set in the case includes three tips with different rigidity. Reliable, well-casting, threepiece medium-fast action type fishing rods are equipped with two detachable sensitive tips of different rigidity. A reliable, three-piece medium action type fishing rod with two detachable tips that indicate different rigidity.

The blank made of lightweight glass fibre has an IN STEEK connection, is equipped with guides with ceramic inserts, a convenient neoprene handle and a reliable screw-type reel seat. It is recommended for a wide range of anglers. This medium-fast action picker rod is made of lightweight glass fibre. Lightweight, well-balanced, well-casting fishing rods allow active angling with a quick changing of angling places, from any bank or from a boat. They are equipped with three detachable tips, which indicate different rigidity.

All match fishing rods are made in accordance with special requirements for the tackle of this type. They meet all the necessary conditions: are executed on a lightweight blank from 3. Modern design and angling fashion have certainly been taken into account by designers and manufacturers when creating this series.

The blank is made of IM7 graphite with the reinforced laying of carbon fibre, which ensures rigidity, maximum casting ability and precision of casting.

It is equipped with high original Guides with SIC inserts and a combined handle with a buffer on the base end. The handle has a graphite reel seat installed. It is completed with a rigid tube. Classic three-piece rod designed for match angling. Combined corkand-neoprene handle has screw-type reel seat with lower fastening nut and rubber buffer at the end. The combined cork and neoprene handle has a screw-type reel seat with a lower fastening nut and a rubber buffer on the base end.

A series of inexpensive, medium action type match fishing rods. The composite, which mainly consists of IM6 graphite, has allowed a sufficiently lightweight and durable blank to be manufactured. It ensures good balance, good casting ability and precision when casting. A large number of high guides with SIC inserts allows favourable working with tackle up to 25 g — in rainy weather, too.

Fly Fishing Rods The popularity of fly fishing is quickly growing among anglers. SALMO fly fishing rods for angling on artificial flies are represented. Thanks to the blank action type and accessories, these fishing rods are a generally excellent and inexpensive fishing tool. These medium-fast action type fly fishing rods are made of IM7 graphite with a special carbon fibre weave. The action type of the fishing rod allows beginning anglers to master the basics of fly fishing in the easiest way; it ensures the smooth and aimed casting of the fly.

All fishing rods of this series are equipped with a cork handle with a classic metal reel seat. The tulip and guides of the upper piece are made of high-quality stainless steel wire and have one fastening point; the two biggest guides of the lower piece have SIC inserts, which facilitates an increased casting distance and the durability of the line.

Each of three fishing rod models is made for a specific line class. These powerful fishing rods of sufficient length are intended for power casting heavy lures great distances from the shoreline. The design of these special fishing rods allows adequate coping with this task even with strong surf wind. The powerful three-piece fishing rod is made of lightweight glass fibre and intended for power casting heavy lures into the wind.

The fishing rod is equipped with reinforced guides with SIC inserts; in doing so, the biggest ring is compactly folded when transporting. The powerful telescopic fishing rod for angling in the sea is made of composite. The telescopic design of the fishing rod ensures an ease of transportation. The blank has reinforced guides with SIC inserts installed on high legs. The guides are protected with a special durable cover made of a foam material encased in nylon.

These are ready to use tackles selected for the main kinds. Those who purchase a ready set need only to go to a body of water and hook bait or to tie on their spoon bait of choice. The set of angling rod consists of a telescopic fishing rod and ready to use float tackle. Please do not forget to hook bait — it is not a part of the set. This angling rod set consists of a powerful telescopic fishing rod and a TAIFUN reel, fold-out landing net and a stand under the fishing rod, packed in a plastic bag.

The fishing rod is intended for angling big fish: pike with live-bait and carp or big trout in pond farms. A monofilament fishing line is wound on the reel spool. The set is packed in a convenient plastic bag with a zip fastener.

The compact set is suitable for angling grass pike, bass and other predatory fish of medium size. The multipurpose set is suitable for angling pike, bass and other predatory fish. The fishing rod is intended for angling big fish: carp, pike with live-bait and big trout in pond farms. It is made at a specialised factory in Japan. A soft, transparent fishing line with low a stretch coefficient that ensures its high sensitivity and necessary elasticity.

It is unreeled on spools of 30 m and m. The fishing line is for all-season use and is very resistant to UV radiation. The soft fishing line has faded aqua colour. It retains its positive properties all year round. Special processing has increased its resistance to UV radiation and long periods in water. It is unreeled on spools of m. The fishing line is light-green for a camouflage effect. The colourless fishing line is absolutely invisible in water.

Made in. It is of a light grey colour. The soft fishing line has a light green colour that camouflages it as algae.

Diameter, mm 0. High durability and softness are distinctive features of this fishing line series. The fishing line is dark green and in spools by m. High strength, a low stretch coefficient and softness are distinctive features of this fishing line series. The fishing line is resistant to UV radiation.

Wide range of lenghts on the spools: 20, 91, , , and m. Made in Japan. Braided line is recommended to use in cases when needed line strength for normal monofilament lines is not enough. Their bodies are produced only from balsa. The high execution level of all float components and the entire product: high-quality surface Floats are supplied in piece blister packages.

High-quality exterior finish ensures the long life of the floats. Floats are supplied in piece polybag packages. Black silicone stopper.

A set contains 10 pieces. Silicone Stopper Silicone stoppers of various colours. Every stopper size is intended for a certain fishing rod diameter. To put the stopper on a fishing line, the fishing line should be inserted in the wire eyelet and the stopper should be moved on it. A set contains 30 pieces. It is not customary to be thrifty regarding such small things. In order to avoid losing. All of them are represented in this section. The set contains leaders in three sizes, with 10 pieces in each size.

Each size has its own breaking load. High-quality leaders made of an extra-strong modern material — titanium wire.

The non-corrodible leaders have a dark black oxide outer coating. They are recommended for spin fishing and trolling fishing. All leaders are equipped with swivels and snaps made in Japan.

They consist of 49 inter-braided steel micro wires. These leaders are very soft and elastic — they are no more rigid than monofilament fishing line of the same diameter. The leaders are equipped with high-quality Japanese swivels and snaps that are fastened with crimping tubes. The selection of fasteners has been performed in accordance with the breaking load on the leader material. Depending on the current, the distance of casting and other factors, it is easy to select the necessary feeder from the range below.

It is equipped with an additional plummet. It is intended for fishing in stagnant water and water bodies with a slow current. Package contains 6 pieces. A twisted steel feeder. It is equipped with an additional ring for tying on the leader. It is intended for fishing in stagnant water. A half-round steel feeder. It is intended for fishing in stagnant water and water bodies with current. A round steel net-shaped feeder. The net-shaped material of the feeder allows the bait to be better washed away with water.

It is equipped with an basket holder and an additional ring for tying on the leader. These are straight and net basket holders with latch hooks fastened onto them. A feeder or plummet can be fastened to the latch hook. The anti-twister prevents tackle with hooks from twisting around the main fishing line. There is a wide choice of these audible indicators in the range; they are attached directly on the fishing line or fastened to the fishing rod tip.

Bells, little bells — all of these audible indicators emit an audio signal if an angler is not visually paying attention to his line. Many anglers specially install these indicators. Rod binders are necessary for securely transporting fishing rods. It allows several fishing rods to be joined together before putting them in a case. Fishing Line Counter A small counter will tell you the length of released fishing line when trolling.

The counter is fixed on the fishing rod. The special structure of its working body will allow you to easily clean even the roughest scaled fish, such as perch. Guides SALMO Almost all modern spinning rods and float fishing rods are equipped with guides and rod tops with wear-resistant frames. Despite the fact that manufacturers are constantly improving the characteristics of rings, they still can be damaged due to the negligence of some anglers. Every angler knows that the damage of this small detail renders the rod.

It has a ceramic fitting and is used only with monofile lines. The fitting is made of silicon carbide SIC with a titanium nitride coating and is used with monofile fishing lines and braided cords.

RING No. Fishing Rod Holders Rod holders are used to secure rods during the fishing process. A mount is not included in the holder set. Telescopic rod mounts are needed to hold the rod when angling.

Support for fitting of three carp rods. Made of aluminium, for transportation can be placed in a special case. Extractors Extractors-forceps let you easily pick and remove hooks from the mouth of a predatory fish.

Special Extractor Extractor in the form of fishing scissors. Supports for fitting three carp rods. Made of metal. Packed in a special cover for transportation. Clippers are necessary for cutting excess fishing line remaining after attaching bait.

A retriever is used to avoid lose such a small thing in the water when fishing. To avoid injuries from the sharp teeth of a pike when removing a hook from its mouth, you need to hold its jaw open.

Mouth spreaders will do this for you. Each part can withstand up to 48 kg. Equipped with weight scales up to 20 kg and a 1 m tape-line. Handy collapsible landing net with a triangular net shape and telescopic handle. Mesh 0. A clamp for fastening to the belt. Two-piece collapsible square landing net with telescopic handle.

Equipped with a clamp for fastening to the belt. Lengthy collapsible landing net with a triangular net shape, telescopic handle and a clamp for fastening it to the belt. Collapsible triangular landing net with telescopic handle. Mesh 1. Landing Net for Wade Fishing Landing net with short handle. Small size suitable for wade fishing. Collapsible landing net, handle folds inside. Round landing net, clamp for fastening it to the belt. We advise you to use long cages with mounts.

Simple, average-length fabric keepnets. Cages are installed in the water by hanging them at the inlet by a cord. Equipped with tilting device for setting the necessary inlet slope. Mount for setting the keepnet on shore is not included in the set. Spacious, fabric keepnets with a portable mount to install them on shore. The bottom of the cage is equipped with a lock for easy removal of fish.

The inlet is equipped with a protective lid that automatically closes by a spring. The keepnet WBF has an upper protective lid — a floater that helps the cage stay afloat. All boxes are resistant to silicon, oil and most solvents. With carrying handle. Various fishing cases will let you always have your gear at hand, to store it securely, easily find what. Cases for storing live baits are also available. With shoulder strap. With removable partitions.

Plastic Fishing Case A medium-sized one-sided case with divisions for storing small fishing tackle. Each swing division is protected by a transparent cover. Eachswing division is protected by a transparent cover. Secure lock, ventilation holes. Double-swing hook box with divisions in each part. Hook Box with Magnetic Cells Double-sided box with many cells for storing hooks. Hooks can be easily taken out with a special stick included in the set.

A bag for storing lures. A compact bag for your bait. Many pockets: two large side pockets, two front pockets and several small pockets for various tackle. Special bag for storing and transporting waders. Size: 48 x 28 x 30 cm. Size: 53 x 30 x 66 cm. Wader backpack. Fishing backpack.

Made of modern materials, these products will help you keep your favourite tackle and lures for many years. Rod case. Length: cm. Rod tube Intended for the storage and secure transportation of fishing rods. A case for the storage and transportation of reels.

Light clothing for warm and sunny weather — a T-shirt with a modern camouflage colour. Material: polyester. With waders, you can fish almost anywhere — near the edge of water plants and in clear water. Material: neoprene and rubber. Glasses case will protect your glasses fromscratches, dust and damage. There are two barbs on the tip. Fish often catch themselves on the curve. Colour: BZ. Colour: NSB. The hooks are ideal for such lures as various cereals and corns.

Colour: BL. Hook series with wire protection. Colour: N. Thanks to two additional barbs on the tip, the hooks perfectly hold any type of bait. Colour: R. Classic form hooks with a straight, folded edge tip. The hooks are packed by the three-in-one principle. Colour: MIX. Specialized hooks can be used in rigs. Circle of curvature of the hook shape with straight stem and a wide opening. Hook spike directed inwards, but eyelet outwards.

Hook spike and eyelet directed inwards. The most high-quality materials and modern technological preproduction are used to manufacture the hooks. All these facts guarantee the stable and high quality of the hooks.

Even a small hook will. Colour: N The highest quality of wire allows these reliable hooks to be made rather thinly and so they are barely visible. Colour: B. This hook series with a forged hand-line is characterised above all by its great strength. All the products of this system have one thing in common — carp! Carp Galaxy attracts thousands and thousands of admirers to this majestic type of fishing. The nature of these components is thoroughly mastered. The attraction of the galaxy is infinite.

Every true carp fisher is a professional with an astronomic desire to find harmony and correct links between the stars in the Carp Galaxy.

It is available to everybody and makes carp the centre of fishing attention. Precisely this is real carp fishing. A specialised reel intended for carp angling on ground tackles. A durable carbon-plastic case, precise micro-adjustment of the front friction brake, durable handle with convenient grip and the general reliability of the entire mechanism place this reel among tackles intended for anglers who place the reliability of tackle as the top priority.

Fittings are equipped with hooks and are linked on braid with a test weight of 25 lbs. Portable landing net made of two parts and with a triangular net. Has volume and audio signal tone adjustment. Bag for bait. Specifications and materials: No. Thanks to height-adjustable legs, the table can be set in a horizontal position ashore of a reservoir.

Weight: 1. The use of one reinforcement strip inside and two reinforcement strips outside the boat provides a connection that guarantees durability and a completely airtight pontoon. This bow guarantees maximal stability and the best manoeuvring performance of the boats. The tips of the tubes have a special form to achieve a better hull angle when moving and more rapidly achieve a state of hydro planing.

This boat has 4 separate tubes. It guarantees buoyancy even in the event compartments are ruptured. A comfortable boat ideal for family water trips or for a group up to eight people. This boat. The durable transom made of special marine plywood allows the boat to be equipped with a powerful engine.

The set includes two folded oars, a pump and a repair kit. The boat comes in two colours: grey-blue and green. This boat has four separate tubes. This boat has two wide seats, a handrail, folded oars, and a pump. The construction of boat ensures good manoeuvrability and permits the use of powerful outboard engines.

This boat has two wide seats, a handrail, folded oars, a pump and a repair kit. The set includes a light and durable. All the boats have a hard transom for engine mounting. Boat colour — dark grey. Bottom type — rigid covering. Comes with the hinged transom for 4 hp motor. Folding aluminium oars. Two hard seats. Carrying bag. Repair kit. The boat is produced by welded seams technology. This engine can rotate around its axis, ensuring the high manoeuvrability of the boat.

Modern decisions in the further development of environmentally safe outboard motors. The motor models and run on 12 V accumulators; the runs on two 12 V accumulators.

Waterproof Pockets This waterproof bag is fastened under the seats of boats and is intended as a compact storage compartment. Repair kit for boat. Includes all the necessary components for repairing of not serious ruptures of bulbs. A great choice of clothing for any kind of weather and situation.

The blank is made of IM7 graphite with the reinforced laying of carbon fibre, which ensures rigidity, maximum casting ability and precision of casting. It is equipped with high original guides with SIC inserts and a combined handle with a buffer on the base end. The handle has a graphite reel seat installed. It is supplied with a rigid tube. A classic three-piece fishing rod for match angling with Over Steek connection.

A composite handle made of cork and neoprene handle has a screw-type reel seat with a lower fastening nut and a rubber buffer on the base end.

A composite handle made of cork and neoprene has a screw-type reel seat and EVA buffer on the base end. A series of inexpensive, medium action type match fishing rods. It ensures good balance, good casting ability and precision when casting. A large number of high guides with SIC inserts allows favourable working with tackle up to 25 g — in rainy weather, too. Fly Fishing Rods The popularity of fly fishing is quickly growing among anglers.

Thanks to the blank action type and accessories, these fishing rods are a generally excellent and inexpensive fishing tool. These fly fishing rods of medium-fast action are made of graphite IM7 with special carbon fibre weaving.

This action of the fishing rod allows anglers-beginners to master the basics of fly fishing in the easiest way, and it allows for making a smooth and targeted casting of the fly. All fishing rods of these series are equipped with a cork handle with a classic metal reel seat. The tulip and guides of the upper piece are made of high-quality stainless steel wire and have one fastening point, two largest guides of the lower piece have SIC inserts, thus increasing the distance of casting and the durability of the line.

Each of three fishing rod models is made for a specific class of line. This powerful fishing rod of sufficient length is intended for power casting, heavy lures and great distances from the shoreline. The design of this special fishing rod allows adequate coping with this task even with strong surf wind. A powerful telescopic fishing rod is made of composite and is intended for angling in the sea. The telescopic design of the fishing rod ensures easy transportation. The blank has reinforced guides with SIC inserts installed on high legs.

The screw-type reel seat is installed at a distance of 70 cm from the base end of the fishing rod, which allows sweeping and powerful casting. The guides are protected with a special durable cover made of a foam material encased in nylon. Fishing and spinning rod sets These are ready to use tackles selected for the main kinds of angling: spinning, telescopic and multi-purpose, special telescopic for angling pike, a float set and even a specialised set for angling carp.

Those who purchase a ready set need only to go to a body of water and hook bait or to tie on their spoon bait of choice. The set of angling rod consists of a telescopic fishing rod and ready to use float tackle. Please do not forget to hook bait — it is not a part of the set.

This angling rod set consists of a powerful telescopic fishing rod and a TAIFUN reel, fold-out landing net and a stand under the fishing rod, packed in a plastic bag. The fishing rod is intended for angling big fish: pike with live-bait and carp or big trout in pond farms. A monofilament fishing line is wound on the reel spool. The set is packed in a convenient plastic bag with a zip fastener.

The compact set is suitable for angling grass pike, bass and other predatory fish of medium size. The multipurpose set is suitable for angling pike, bass and other predatory fish. The fishing rod is intended for angling big fish: carp, pike with live-bait and big trout in pond farms. Modern monofilament fishing line made of high-quality nylon of W-DMV brand, which allows ensuring higher wear-resistance and durability on the knot.

Soft transparent fishing line with low stretch coefficient, which ensures its high sensitivity and required elasticity. The fishing line is perfectly calibrated according to the set diameter and is designed for the all-season use. This fishing line is resistant to UV radiation and different application temperatures. It is unreeled onto high-tech spools Doughnut of and 50 metres.

A special fishing line for spin fishing. High durability and softness are distinctive features of this fishing line series. The fishing line is dark green and in spools by m. The fishing line is resistant to UV radiation.

A special fishing line for angling with feeders and pickers. High strength, a low stretch coefficient and softness are distinctive features of this fishing line series. The fishing line perfectly informs of all bites on the signal tip of the fishing rod.

The fishing line colour is an alternation of black and red; spools are by m. A modern, soft and durable monofilament fishing line. This fishing line is made with high quality of surface and with a calibrated diameter along the entire length; it is resistant to abrasion from underwater obstacles such as algae, stones or pit edges. The fishing line is sufficiently elastic — it is capable to dampen even the most active jerking of a hooked fish.

The fishing line is light-green for a camouflage effect. Diameter, mm 0. For the strength of this monofilament fishing line, its chemical composition includes special components. The fishing line has a low stretch coefficient, but it is sufficiently elastic to dampen the jerking of a fish when playing the fish.

The soft fishing line has a light green colour that camouflages it as algae. The angle of the refraction of light passing this fishing line in water is the same as of the water itself; making the line less visible in water. The fishing line is resistant to abrasion, is soft and durable.

It is of a light grey colour. Special fishing line made of fluorocarbon and designed for angling trout and other cautious fish. The transparent colourless fishing line is invisible to the fish in the water.

The material is soft, wear-resistant, heavier than water and invisible in water. When storing and using, fluorocarbon is a lot more durable than any nylon fishing lines. The fishing line is unreeled onto high-tech doughnut spools of metres. The fishing line is produced and unreeled at a specialised factory in Japan. Fast-sinking specific weight — 1. Fluorocarbon is invisible in water light refraction angle is the same as with water , does not absorb water and retains its durability for a long period.

Low linear stretching ability prevents the thinning of fishing line and retains its durability, which allows making a stiff strike. The fishing line is unreeled onto high-tech doughnut spools of 30 metres. The colourless fishing line is absolutely invisible in water.

The advantage of the sinking fishing line manifests in increasing the sensitivity of the fishing tackle. If we use a normal fishing line for spoon-bait fishing at depths up to three meters, then contact with the fishing line is not lost up to a depth of four meters when using a sinking fishing line of the same diameter and the same spoon-bait.

It can be successfully used not only for tying leaders, which will considerably increase the number of bites, but also as the main fishing line. Fishing line is made in spools of 30 m in Japan.

Professional PE cord with extra dense braiding of 4 strands, ensuring the highest smoothness and durability. The round cross-section and smooth surface of these cords not only ensures smooth and tight laying onto the reel spool, but also allows for performing extremely far and precise casting.

Practically zero stretching ability guarantees high sensitivity and fast confident strike. Apart from that, cords have high precision at knots and are resistant to abrasive impacts.

The fishing line is made with the diameter of 0. It is produced and unreeled at a specialised factory in Japan. A colour PE cord with extra dense braiding of 4 strands, ensuring the highest smoothness and durability. The cord has five bright colours interchanging every 10 metres, which ensures visual control over the casting distance and the distance at which the bites of the fish occur. It is produced at a diameter of 0. The fishing line is unreeled onto hich-tech spools Doughnut of metres.

Factory supplied PE wire line of super density, braid with 8 strands, provided with the highest lubricity and durability. Manufactured with diameter from 0.

Supplied in individual package in reeling by m. The wire line is manufactured only in Japan. High quality PE wire line of sport class, braid with 4 strands. The wire line is specially developed for fishing with light or ultralight tackles. Manufactured with the diameter range from 0. The braid fishing line is notable for high braid density, low stretch coefficient and increased durability. The braid fishing line is highly sensitive and ensures permanent contact with the lure, regardless of the distance to it, which is very necessary for timely hooking.

Its high strength allows thinner diameters of braid fishing line to be used, as well as the angling of big fish. Fibres of the braid fishing line are practically unsaturated with water, which, combined with special impregnation, makes fishing possible even in low temperatures. The yellow colour of this fishing line is very convenient for angling in open water not obstructed by ice, when an angler can more easily follow bites on the line; it is proven that big predatory fish do not respond to yellow colour in any way.

Wide range of lenghts on the spools: 91, , , and m. Made in Japan. Dark-green colour. Made of SPECTRA USA fibre, it has a round section and slips through the guides, easily allowing for those few extra metres so that the bait can be placed exactly where the fish are feeding.

Thanks to its special treatment, it sinks much faster than ordinary braided lines, limiting the gear movement to a minimum and giving you extra-quick control over the bait.

Its brown colour makes it unnoticeable for fish that might have been spooked. It is recommended to use in cases when the required durability cannot be achieved by means of ordinary nylon fishing lines. The cord of round cross-section with classic braiding of 4 strands. Their bodies are produced only from balsa. The most popular forms of these high-quality floats: tearshaped, ball-shaped and of elongate shape floats are in high demand not only among sports fishermen, but among amateur anglers, too.

The high execution level of all float components and the entire product: high-quality surface finish and lacquer coating places these floats among the best in the world. Different structures and materials, from which antennas and keels are made, as well as different methods of fastening the float to the tackle make it easy to select the necessary type for any kind of angling.

Floats are supplied in piece blister packages. High-quality exterior finish ensures the long life of the floats. A special series of floats intended for angling with distance casting, for night angling with a fishing light and live-bait fishing.

Floats are supplied in piece polybag packages. Fishing lights not only improve the visibility of floats, but also work as components of some bell models at night.

The offered range contains models intended to light up tents. The purpose of the fishing light depends on its size. Mounting dimensions for mounting holes are specified on the package. Black silicone stopper. It is used for limiting the depth of tackles with a sliding float. Every stopper size is intended for a certain fishing rod diameter. To put the stopper on a fishing line, the fishing line should be inserted in the wire eyelet and the stopper should be moved on it. A set contains 10 pieces.

Silicone stoppers of various colours. A set contains 30 pieces. Stopper Knot It is used for limiting the depth of tackles with a sliding float. After tightening the knot, the excess ends of the thread are cut off. They can have various designs, but their purpose is the same — to collect more fish on the bottom and near hooks so fishing would finally be successful.

Depending on the current, the distance of casting and other factors, it is easy to select the necessary feeder from the range below. A twisted steel feeder. It is equipped with an additional ring for tying on the leader. It is intended for shing in stagnant water.

Package contains 6 pieces. A round steel feeder. It is equipped with an additional plummet. It is intended for fishing in stagnant water and water bodies with a slow current.

A round steel net-shaped feeder. It is intended for fishing in stagnant water. The net-shaped material of the feeder allows the bait to be better washed away with water. A round plastic feeder. Due to its small size, it allows holding the fish on the spot, without overfeeding it. The package contains 10 pieces.

Due to its aerodynamic shape, it allows casting at long distances. Bells SALMO Bells, little bells — all of these audible indicators emit an audio signal if an angler is not visually paying attention to his line. There is a wide choice of these audible indicators in the range; they are attached directly on the fishing line or fastened to the fishing rod tip.

Fishing Tackle SALMO Fishing tackle and other fishing gadgets necessary for, before and after fishing will make fishing an easy and more than ever fascinating and enjoyable experience. Some of this equipment is presented in this section. A float-angler will need a catapult for precise fish baiting in small portions and at considerable distances from the shore a selection of two models is available. Rod binders are necessary for securely transporting fishing rods.

It allows several fishing rods to be joined together before putting them in a case. Clamp bands for rods The clamp band is necessary for transporting fishing rods securely. It allows joining several fishing rods together before placing them in a case. A small counter will tell you the length of released fishing line when trolling. The counter is fixed on the fishing rod. Guides SALMO Almost all modern spinning rods and float fishing rods are equipped with guides and rod tops with wear-resistant frames.

Despite the fact that manufacturers are constantly improving the characteristics of rings, they still can be damaged due to the negligence of some anglers.

Every angler knows that the damage of this small detail renders the rod. It has a ceramic fitting and is used only with monofile lines. The fitting is made of silicon carbide SIC and is used with monofile fishing line and braided cords.

Fish Scaler When a fish is caught, it can be easily scaled with the use of a fish scaler. The special structure of its working body will allow you to easily clean even the roughest scaled fish, such as perch.

A rod top guide is intended to be fixed at the very top of a spinning rod or rod. The fitting is made of silicon carbide SIC with a titanium nitride coating and is used with monofile fishing lines and braided cords. Fishing Rod Holders, Rod Rests, Mounts SALMO Fishing tackle and other fishing gadgets necessary for, before and after fishing will make fishing an easy and more than ever fascinating and enjoyable experience.

Telescopic rod mounts are needed to hold the rod when angling. Rod holders are used to secure rods during the fishing process. A mount is not included in the holder set. Fishing Rod Fixture on Board a Boat The fixture can be attached on board a plastic or wooden boat and can securely fix the rod in it when angling. Supports for fitting three carp rods. Made of metal. Packed in a special cover for transportation.

Support for fitting of three carp rods. Made of aluminium, for transportation can be placed in a special case. To avoid injuries from the sharp teeth of a pike when removing a hook from its mouth, you need to hold its jaw open. Mouth spreaders will do this for you. Extractors are indispensable when you need to quickly remove a fish from the hook, especially when the hook is deep in the mouth of the fish. Equipped with weight scales up to 20 kg and a 1 m tapeline.

Live bait Nets You will need a live bait net to trap live baits for angling predatory fish with fishing devices. Telescopic Aluminium Live bait Net Live bait net with crosspiece curves made with a telescopic aluminium construction. Keepnets of various lengths will solve this problem. Recommended long keepnets with stand for easy fastening them on the beach. After each caught fish, you do not need to go into the water, to lower it into the tank.

Reach out and put the caught fish in the tank. Spacious fine-mesh fabric keepnet. Equipped with tilting device for setting the necessary inlet slope.

Mount for setting the keepnet on shore is not included in the set. Metal keepnets are regarded as the most durable and long-lasting and can be easily cleaned of fish slime.

Various keepnet sizes are offered. The inlet is equipped with a protective lid that automatically closes by a spring. The bottom of the cage has a vent with a lid that opens inward, making removal of fish easy.

The keepnet WBF has an upper protective lid — a floater that helps the cage stay afloat. Spacious, fabric keepnets with a portable mount to install them on shore. The bottom of the cage is equipped with a lock for easy removal of fish. All boxes are resistant to silicon, oil and most solvents.

Some of the models can carry a load up to 90 kg. Various fishing cases will let you always have your gear at hand, to store it securely, easily find what you need and carry it along for fishing with certain type of bait. Cases for storing live baits are also available. A small one-side case with partitions for storing small fishing tackle.

With removable partitions. A medium-sized one-sided case with divisions for storing small fishing tackle.

Medium-sized double-sided case with partitions for storing small fishing tackle. With carrying handle. Compact bag for baits. A bag for storing lures. A small double-swing box for hooks and other small fishing tackle; the box has a division in each part.

Each swing division is protected by a transparent cover. Eachswing division is protected by a transparent cover. With shoulder strap. Hook Box with Magnetic Cells Double-sided box with many cells for storing hooks. To avoid mixing hooks of different sizes and purposes, the bottom of the cells are magnetic.

Hooks can be easily taken out with a special stick included in the set. Secure lock, ventilation holes. Multifunctional fishing bag.

Many pockets: two large side pockets, two front pockets and several small pockets for various tackle. Convenient bag for fishing tackle. Universal bag for transporting fishing tackle. Size: 48 x 28 x 30 cm. Universal bag for transportation fishing clothing. Convenient bag for fishing tackle is made of waterproof polyester D PVC technology Rip-Stop material having increased strength without increasing the weight and nylon D PU. Tubes, Cases SALMO Tubes, cases and bags represented in this section are intended for the storage of fishing rods, reels and baits, as well as for their secure transportation to the place of fishing.

Made of modern materials, these products will help you keep your favourite tackle and lures for many years. Rod tube-case Rod case. Length: cm. A tube for storing and transporting fishing rods. Intended for the storage and secure transportation of fishing rods. Length — and cm. Rod tube Intended for the storage and secure transportation of fishing rods. Length — cm. Rod case A case for the storage and transportation of long fishing rods. Length — cm and cm. Length — x cm. Glasses case will protect your glasses fromscratches, dust and damage.

Specialized hooks can be used in rigs. Available three different kinds of carp hooks. Classis offset hook with round wide bend, complete barb sharpening, straight lengthened fore part and straight-angle step. The increased width of the hook ensures secure biting. The hook is very convenient for fitting bulky lures from soft plastics – thick-bodied worms, large twisters and slugs.

Colour: B. Offset hook with the widest bend that allows for the easy fitting of bulky lyres – vibrotails, twisters, etc. Hooks with classic right-angled step for fixing plastic lures and the sharpest barb. Hooks specially made for drops-shot gear – the bent-back ring allows the lure to lie horizontally in the water.

The Palomar knot is recommended for fixing it in place. The hook is made of relatively thin wire, has a unique bend and the sharpest barb. It is one of the most popular hooks among float fishing sportsmen that has a ring.

This hook series with a forged hand-line is characterised above all by its great strength. The hooks have a hook point bent slightly inward and are ideal for fishing with both vegetable and live bait.

Colour: NSB. Very catching fish hooks with a blade for fishing line. The highest quality of wire allows these reliable hooks to be made rather thinly and so they are barely visible.

A fish hook series with a circular, folded edge and shortened tip, ideal for catching large fish. There are two barbs on the tip. The barbs hold any type of lure more firmly. These hooks are suitable for fitting bottom fishing gear — pickers, feeders and special fishing lines for bottom fishing. The hooks easily penetrate fish scales, even when striking lightly. Fish often catch themselves on the curve. Colour: BZ. A fish hook series with a circular folded edge and shortened tip, ideal for catching large fish.

Hooks are suitable for fitting bottom fishing gear — pickers, feeders and special fishing lines for bottom fishing. The hooks are ideal for such lures as various cereals and corns.

Colour: BL. These powerful hooks are made of highquality carbon wire and are designed for vegetable bait to catch carp and other large and strong fish. Used both for float and bottom fishing.

The hooks are widely used for fitting plunkers, tackles, plastic and other lures. The hooks are mostly suitable for crucian carp and carp fishing. Colour: BZ, G. Series Hooks Cobra STRUGER Very catching fish hooks with a long tip and slightly widened folded edge; hooks are used for angling mid- and small sized fish by means of live and vegetable bait.

They are recommended both for large and small fish catching. They are ideal for fishing with moths, small worms and other bait. Colour: N. These hooks have shown great results with live bait fishing – they do not restrict the movement of the fish with their weight.

Thanks to the special barb sharpening, the hook easily penetrates solid cartilage or bone matter. The slightly backwards-bent ring allows for different types of line fastening. These hooks are recommended for most big trophy fish angling. Thanks to two additional barbs on the tip, the hooks perfectly hold any type of bait. These hooks are recommended for most large trophy fish angling. Classic form hooks with a straight, folded edge tip. The hooks are packed by the three-in-one principle.

Every pack contains three hooks with three different coloured coatings. B, R and G, which makes hooks and tackle less noticeable to fish. Colour: MIX. Classic form hooks made of thin wire. They are widely used in sport and nonprofessional fishing for angling mid- and small sized fish with live bait.